Collection of branded gifts

Case studies

Work we have made for other brands

A look at what we have produced for the companies we work with, what was branded and how it was done. Each one notes the item and the method, because the method is usually the part that decides whether a mark lasts.

Selected work

How the method changes the mark

Filter by branding method to see what each one looks like once it is on a finished product.

Debossed logo on a leather desk pad

East Field Corporation

A desk piece that brands itself quietly

The logo is pressed into the leather rather than printed onto it, so there is no ink sitting on the surface to lift at the edges.

Item
Desk accessory
Branding
Deboss and emboss
Full colour print on a clear PVC tote bag

MELILEA

Full colour on clear PVC

Clear PVC leaves the artwork with nothing behind it, so the colours had to hold on their own.

Item
Tote bag
Branding
Digital UV printing
White screen print on an umbrella canopy

Motorola

One white mark, canopy and sleeve

A single flat colour on a dark canopy is what screen printing does best.

Item
Umbrella
Branding
Screen printing
Screen printed logo on a travel adaptor

Evolution

Branding on a piece that travels

A travel adaptor is handled constantly, so the print sits on the flat front face where it is least likely to rub.

Item
Travel adaptor
Branding
Screen printing
Laser engraved logo on a stainless steel tumbler

MiTAC

A mark cut into the steel

Engraving removes a thin layer of the surface instead of adding ink, so there is nothing to wash off.

Item
Drinkware
Branding
Laser engraving
Red screen print on a canvas shopping bag

Honda

One colour, centred, on heavy canvas

Canvas takes screen ink well, so a solid red reads evenly across the weave without the edges breaking up.

Item
Tote bag
Branding
Screen printing
Engraved emblem on a leather card holder

Rotary

An engraved emblem on a card holder

The emblem is engraved into the PU surface, so it stays clean in a pocket or a bag where a printed mark would scuff.

Item
Office accessory
Branding
Laser engraving
Two colour print on a laptop sleeve

Meta

Two colours on a grey laptop sleeve

The mark sits low on the front panel, clear of the zip and the seams, so it is not broken up when the sleeve is packed.

Item
Laptop sleeve
Branding
Screen printing
Full colour printed notebook covers

ADPlus

Full colour covers, front to back

The artwork runs across the whole cover rather than sitting as a small logo in a corner, so the books read as a set from a distance.

Item
Notebook
Branding
Digital UV printing
One logo printed on three pen colourways

Hyperion

One pen body, three colourways

The same white logo was printed onto three barrel colours, so the set works as a range without new artwork for each one.

Item
Pen
Branding
Screen printing
Debossed mark on a leather tape measure

Lasertec

A mark you only catch at an angle

The wordmark is pressed into the leather cover with no ink at all, so it carries the same blue as the case around it.

Item
Tape measure
Branding
Deboss and emboss

More work

This is a selection, not the whole list

We have produced plenty more than the pieces shown here. Tell our team the product or the branding method you have in mind and we will send examples that match.

Contact our team

Something similar in mind

Tell us what you are branding

Send the item, the logo and roughly how many you need. We will come back with the method we would use and a quotation.

Start an enquiry